Power Substations
Rural Electrification
Railway OHE Electification
Solar Module Mounting Structure
Metal Beam Crash Barriers
Pre Engineered Buildings
Structure Power Plant
Deepwell Water Handpumps
Scaffolding
POWER SUB- STATION STRUCTURES
These structures includes Gantries and Equipment Support Structures. Gantry structures are mainly used for guiding the power conductor from last tower near substation to the electrical equipments in a substation.
This structure consist of a number of columns and Girder beams, which depend on number of circuits of the line. Gantries are also used for line crossing.
Power conductors of one line can be underpassed with the help of required number of gantries. Equipment Support Structures are columns, supporting electric equipments in a substation.
We offer wide range Substation Structures for all types and varieties of Power Sub Station up to 765 KV.
We have full in-house Fabrication and Hot Dip Galvanizing Facilities that assist in the quality production of the Power Distribution Structures.
Approved By
- Power Grid Corporation of India
- Himachal Pradesh State Electricity Board
- Haryana Vidyut Prasaram Nigam Ltd.
- Bihar State power transmission company ltd. & various power distribution companies.
RURAL ELECTRIFICATION STRUCTURE
The power generation sector has faced tremendous challenges till now especially with rural electrification. But with the governments increasing focus on rural electrification to establish the route of sustainable growth presents with a business opportunity in providing steel structures for Rural Electrification.
We at Vishal Pipes Ltd. are leading manufacturer & supplier of pre-fabricated galvanized items required in rural electrification in India. Our quality has been appreciated through out the county and have received repeated orders too.
Approved By :
Various Power Distribution company in India.
RAILWAY OHE STRUCTURE
We are CORE approved vendor to manufacture and supply following structure for railway overhead electrification.
- Rolled Mast
- B-series Mast
- Special Fabricated Masts
- Portals
- Two Track Cantilever (TTC)
- Traction Sub-station.
- Small Part Steel (SPS)
These structures are manufactured and galvanised as per RDSO specifications.
Approved By – Central Organisation For Railway Electrification (CORE), Prayagraj,
SOLAR MODULE MOUNTING STRUCTURE
Leading manufacturer of Solar Module Mounting Structures to support the Solar PV panels.
- In-house production, quality control and continues product development guarantees excellence of our entire product range.
- Large manufacturing capacity that enables quicker delivery.
- Vast spectrum of sectional dimensions and thickness.
- Reduced overall cost of structure and in turn reduced cost of solar power projects.
- Suitable for virtually all terrains and site conditions due to flexible pile positioning and design adaptability. Engineered for maximum strength-to-weight ratio and constructed with optimized material for maximum strength and durability
METAL BEAM CRASH BARRIER
Vishal Pipes Ltd. is a leading manufacturer and supplier of metal beam crash barrier systems. Our range of road and highway safety barriers include the various types of W-Beam and Thrie-Beam systems.
These crash barriers are manufactured by using superior class raw materials and the latest technology in order to ensure the finest quality products. We continue to service our customers through our ongoing program of research and development.
Guard rail or Metal Crash Barriers are very effective road safety systems which help in protecting vehicles and the passengers in case of an accident and also serve as a good visual guide for drivers, especially in the night. Vishal Pipes Limited supplies the best Guard rails which are strong, sturdy and aesthetic.
Our crash barrier systems are widely used for highways, flyovers, bridges and median barriers as road separators, hilly terrain, Ghats, curves, high embankments, airports and railway stations among others
PRE ENGINEERED BUILDING
We are manufacturer and supplier of Pre Engineered Buildings. We design these as per the specification of the client.These services provided by us are to be fabricated using best suited inventory of raw materials available from all sources and manufacturing methods that can efficiently satisfy a wide range of structural and aesthetic design requirements.
We offer turnkey solution for PEB under one structure, beginning with designing, fabrication, production and till installation. The offered structures are high in demand due to its energy efficiency and superior load bearing strength. We are developing these structures for creating factory sheds, warehouse, dairy farm sheds and low rise industrial buildings.
They are high in quality and meet the client’s requirement in every term of quality. They are sturdy in construction, require less maintenance and give the constant performance to the user with any problem. Our offered product is well known for attributes like weather resistance and easy installation.
STRUCTURE FOR POWER PLANTS
STEEL HAND RAILS
We offer customized, fabricated & cost effective handrails system that are widely used to guard platforms, stairways, towers, danger zones and other areas where safety is a prime concern. These handrails are heavy duty type with better load carrying capacity, and specially recommended for highly corrosive weather conditions.
SECONDARY STRUCTURE
We offer customized secondary structure for power plant. These structures are made of steel tubes, angle, channel, beams & other steel components. These are supplied after proper surface preparation as per NACE guidelines and painted too.
SCAFFOLDING SOLUTIONS
Scaffolding is a temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man made structures.
Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to. Unsafe scaffolding has the potential to result in death or serious injury. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects.
THE COMPONENTS OF SCAFFOLDING:
- A base jack or plate which is a load-bearing base for the scaffold.
- The standard, the upright component with connector joins.
- The ledger, a horizontal brace.
- The transom, a horizontal cross-section load-bearing component which holds the batten, board, or decking unit.
- Brace diagonal and/or cross section bracing component.
- Batten or board decking component used to make the working platform.
- Coupler, a fitting used to join components together.
- Scaffold tie, used to tie in the scaffold to structures.
- Brackets, used to extend the width of working platforms